Video Welding Articles

Welcome to hgcodedwelding.com Video Welding Articles page.


Some useful tips and tricks about some of the welding products that we recommend and use on a daily basis and we sell in our online welding shop. Hopefully you will find some of these videos informative and helpful. Please ask if there is any specific information that you may have about our welding products? We are here to help.

Compiled & Designed by http://www.mootzproductions.com

 

 

 

MIG Welder Setup For Beginners Summing Up pt 8 HGCodedWelding

Published on Apr 20, 2013

MIG Welding Setup For Beginners: Welds, Summing Up:
This is the final video in this series for beginners introducing the MIG welder basics. Please visit our website where we have a full article write up about this subject and an online welding shop. http://www.hgcodedwelding.com
Please rate and leave a comment.


 

MIG Welder Setup Correct MIG Welding For Beginners pt 7 HGCodedWelding

Published on Apr 20, 2013

MIG Welding Setup For Beginners: The Correct Way To Weld:
This is part Seven in this series for beginners introducing the MIG welder basics and how to MIG weld the correct way. Please visit our website where we have a full article write up about this subject and an online welding shop. http://www.hgcodedwelding.com
Please rate and leave a comment.


 

MIG Welder Setup: The Wrong Way To Weld For Beginners pt 6 HGCodedWelding

Published on Apr 20, 2013

MIG Welding Setup For Beginners: The Wrong Way To Weld:
This is part Six in this series for beginners introducing the MIG welder basics in our next episodes we go in to further detail about how to MIG weld the correct way Please visit our website where we have a full article write up about this subject and an online welding shop. http://www.hgcodedwelding.com
Please rate and leave a comment.


 

MIG Welder Setup For Beginners pt 5. HGCodedWelding

Published on Apr 20, 2013

MIG Welding Setup For Beginners: Guage Setup Process:
This is part Five in this series for beginners introducing the MIG welder basics in our next episodes we go in to further detail about actually welding with the MIG welder and how to MIG weld and the wrong way to MIG weld. Please visit our website where we have a full article write up about this subject and an online welding shop. http://www.hgcodedwelding.com
Please rate and leave a comment.


 

MIG Welder Guage Setup For Beginners pt 4 HGCodedWelding

Published on Apr 20, 2013

MIG Welding Setup For Beginners: Guage Setup Process:
This is part Four in this series for beginners introducing the MIG welder basics in our next episodes we go in to further detail about setting up the MIG welder and how to MIG weld also what not to do. Please visit our website where we have a full article write up about this subject and an online welding shop. http://www.hgcodedwelding.com
Please rate and leave a comment.


 

MIG Welder Setup Feeding The Wire Through The Torch For Beginners Pt 3. HGCodedWelding

Published on Apr 20, 2013

MIG Welder Setup Feeding The Wire Through The Torch For Beginners Part 3:
In this series we discuss feeding the wire through the torch: Please visit our website for a full article , write up about MIG welding setup process. http://www.hgcodedwelding.com


 

MIG Welding Setup Wire Feeding For Beginners: Pt 2. HGCodedWelding

Published on Apr 20, 2013

MIG Welding Setup For Beginners: This is part two for beginners introducing the MIG welder basics in our next episodes we go in to further detail about setting up the MIG welder and how to MIG weld also what not to do. Please visit our website where we have a full article write up about this subject and an online welding shop. http://www.hgcodedwelding.com
Please rate and leave a comment.


 

MIG Welder Setup For Beginners Pt 1. HGCodedWelding

Published on Apr 20, 2013

MIG Welding Setup For Beginners: This is part one for beginners introducing the MIG welder basics in our next episodes we go in to further detail about setting up the MIG welder and how to MIG weld also what not to do. Please visit our website where we have a full article write up about this subject and an online welding shop. http://www.hgcodedwelding.com
Please rate and leave a comment.


 

Why Use Flap discs By 3M 115mm? by HGCodedWelding.com

Published on Mar 16, 2013

Why I use and recommend Flap discs by 3M especially the 115mm discs. We sell these discs in our coded welding online shop.
Special discounts and deals for our registered users and special deals on bulk purchases.
Please rate or comment?


Special Tip Using Hitachi G12SS Grinder By HGCodedWelding.com

Published on Mar 16, 2013

The Hitachi G12SS Grinder. One of the reasons that I think that this grinder is one of the best on the market and one that I use every day. In this video I explain one of the reasons.

Hope that you enjoy.
Please see my other related videos on my channel.
We are offering this Hitachi model on our website now at a special price while stocks last. 

 

Why I Use hitachi G12SS Grinder Tool Tips HGCodedWelding.com

Published on Mar 16, 2013

Another short video from hgcodedwelding.com describing why I use the Hitachi G12SS Grinder. A much safer design to hold the thinner discs as opposed to some other makes and earlier models which basically are dangerous to use with these thinner discs.

I have more videos about tools that we recommend and regularly use on a daily bases.
We are currently offering this Hitachi G12SS Grinder at a special low price on our website

Unboxing Hitachi G12SS Grinder Tool Tips Tricks by HGCodedWelding.com

Published on Mar 16, 2013

A short video showing the unboxing of the new Hitachi G12SS Grinder and how attach the discs. we now have on special offer in our on line shop on our website.

We show more tips and tricks on our Youtube video channel about this tool and why we fully recommend this grinder. A tool that we use every day.

Now On Special Offer While Stocks Last 

Using The Hitachi G12SS Grinder: hgcodedwelding.com

Published on Mar 9, 2013

Using the Hitachi G12ss Grinder:

Special Price for this Hitachi G12SS Grinder:
Another short video demonstration how easy it is to change the discs on the Hitachi G12SS Grinder. This is one of our most used and highly recommended tools.
Please leave your comments about this product?
Important: PLEASE ENSURE THAT THE GRINDER IS UN PLUGGED BEFORE ATTEMPTING TO CHANGE THE DISK:
We now have a special offer on these Hitachi Grinders: 

HGCodedWelding Website: Music: Up In Flames For A Second Time By JDM

Published on Mar 6, 2013

A Short video introduction to HGCodedWelding.Com website.

Hugh Gibson Engineering Services Ltd. Based in Devon, Offer Coded welding repairs BS EN287-1 to Forklift trucks, code welding welder training course service & online shop selling welding equipment . Top brands as Lincoln Electric, Hitachi, Harris, MOSA & Kemppi.

Music by JDM (Mustard Productions)
http://www.mootzproductions.com 


HGCodedWelding.com Website: Music Traditional Mess By JDM Mustard Productions

 

Published on Mar 6, 2013

A Short video introduction to HGCodedWelding.Com website.

Hugh Gibson Engineering Services Ltd. Based in Devon, Offer Coded welding repairs BS EN287-1 to Forklift trucks, code welding welder training course service & online shop selling welding equipment . Top brands as Lincoln Electric, Hitachi, Harris, MOSA & Kemppi.

 Music by JDM (Mustard Productions)
http://www.mootzproductions.com


Adobe Flash Actionscript Welding Video Etched Steel

Published on Feb 28, 2013

Here is a short video. Compiled & Designed by http://www.mootzproductions.com using Adobe Flash Actionscript for HGCoded Welding's Website. Enjoy!

Please visit the website for coded welding information, coded welding related articles, welder training by coded welder WELDING PROFESSIONAL based in Devon England. Also the Online Shop Now Open for business.